Rear wheel track TBL
The TBL rear track balance bike has been specially developed for young cyclists. Riding pleasure and quality are the top priorities for our wheels. The centerpiece is our track hub with industrial bearings. The bearing play is adjustable. We have used the experience gained from our high-flange track wheel hubs to design this track wheel hub. The bearing seats, axle and bearings are identical to the high flange track hub. The hub is designed as a flip-flop version, which means that the wheel can simply be turned to change the gear ratio. It is not necessary to change the sprockets.
This is an economical solution for young riders, as these wheels can be ridden both in training and in races. The Track wheel hub FlipFlop T64FF is installed in this wheel. In terms of smooth running, it is in no way inferior to our high-flange hub. The same axles and bearings have been used.
This wheel has enormous advantages, especially in the endurance disciplines for young cyclists on the track.
The requirements summarized:
- Runs extremely smoothly, wheels turn without noticeable resistance
- The gear ratios are changed by turning the impeller
- Clincher - the tire can be easily changed
- Really fun
- Special conditions for young athletes with a license
The specifications for Track rear wheel TBL at a glance:
- Rim 28″ (700C) aluminum / clincher
- Rear wheel 28 spokes, double crossed
- Track wheel hub FlipFlop T64FFblack, blue or red anodized aluminium
- Round spokes black
- Aluminium nipple anodized black, blue or red
- Quenched and tempered steel axle, rear thread M10x1
- Sprocket thread: BSA 1.37″x24TPI
- Wheel weight: 1160 grams
- Rider weight depending on the number of spokes,
with 24 holes at the front and 28 holes at the rear 70 kg.
The advantage of this spoked wheel on the track is the good control that the rider has even during fast maneuvers, such as in the endurance disciplines on the track.
Attention with threads:
For historical reasons, there are different threads for track wheel hubs.
DIN, ISO and BSA threads have a flank angle of 60°
ITA thread has a flank angle of 55 degrees
The following thread variants are available from HEUER:
BSA 1.37″x24TPI
ITA M35x24TPI
ISO 1.375″x24 TPI on request.
The rear wheel hub for the track is manufactured by us without a lockring.
For Shimano it is the BSA thread
For Campagnolo it is the ITA thread
Incorrect sprocket threads can damage the hubs.
Ensure that the threads (manufacturer) are correctly paired.
English 
Deutsch 
Français