Fixie road hub front S64V
This S64V front fixie road hub was developed for the racetrack. With sealed bearings, this front wheel is optimized for smooth running for daily use on the road in all weather conditions.
The hub flanges have been turned hollow and are inclined inwards. This means that they are adapted to the spoke angle. The S64V front fixie road hub is a cost-effective alternative to the high-flange hub. In terms of smooth running, this hub is in no way inferior to the high-flange hub. Only the flange is slightly smaller. This hub still has a high level of rigidity because the hub flanges are "hollow" and inclined inwards.
Even with radial storage, the spokes arranged on the outside lie exactly against the flange. This significantly minimizes the setting of the spokes.
- Flange height 64 mm
- Aluminum
- Axle with M9x1
- Highly tempered and nitrided axle
- Adjustable bearing clearance
- Mass: 225 g
- Standard with 20 and 24 holes usually available from stock
- other numbers of holes are also available on request
Dimensions for spoke calculation front wheel:
Bolt circle spokes: 53 mm
Flange distance from left: 16.5 mm
Flange distance from right: 16.5 mm
Flange distance: 67 mm
Spoke hole Ø: 2.4 mm
Spoke tension: max 1200N
(observe the maximum spoke tension for the spokes and rims used)
English 
Deutsch 
Français