Wheelset BMX HP64B-HSX Race

Wheelset BMX HP64B-HSX Race

The Wheelset BMX HP64B-HSX Race combines components specially developed for BMX racing in a high-quality, lightweight set. The Heuer hubs have been designed with a particular focus on low weight and efficient running, and fit perfectly with the 32mm-wide carbon rims.

The B64RHSX BMX hub is specially optimized for the Meybo HSX carbon frame. The position of the brake disc mount at 7.5 mm allows the hub to align the rims symmetrically. The large flange spacing of 59 mm ensures maximum stability and robustness.

With a total weight of only approx. 1,085 g (without attachments), this wheelset stands out from the competition thanks to two innovative approaches:

1. Number of spokes
   We use 24 radially tensioned spokes on the front wheel, while 28 double-crossed spokes are used on the rear wheel. Intensive testing on test stands and in practice has shown that rigidity and strength remain at a top level despite the reduced number of spokes. Optimized spoke angles on the hubs (front: flange spacing 75 mm, rear: 59 mm) also contribute to the high stability.
2. Axle diameter
   To further reduce the weight, we have reduced the axle diameter at the front and rear to 12 mm without compromising on strength. Matching adapters and thru axles or screws for assembly are included in the scope of delivery.

Details front wheel

BMX hub B51V Race
– Suitable for forks with 20 mm thru axle (20×100 mm)
– Adjustable bearing clearance
– High-quality industrial bearings with an adjacent seal
– Weight approx. 110 g

Carbon rim 12ELEVEN BMX front
– ETRTO 406×25
– Outer width 32 mm, jaw width 25 mm, height 25 mm
– Finish UD-matt
– Weight approx. 275 g
– Maximum air pressure 6.5 bar

Spokes and nipples
– Spokes Sapim CX-Ray, black
– Nipples Sapim Polyax Alu, black
– 24 spokes, radially spoked

Total weight front wheel approx. 470 g

Details rear wheel

BMX hub B64RHSX Race rear Heuer
– Specifically for Meybo HSX frames
– 15 mm thru axle with matching frame thread insert
– Adjustable bearing clearance
– High-quality industrial bearings with an adjacent seal
– Heuer freewheel with 3° freewheel angle (120 clicks) and mount for Heuer polygon pinions
– Chainline adjustable 43 / 44 / 45 mm
– Weight approx. 245 g

Carbon rim 12ELEVEN BMX rear
– ETRTO 406×25
– Outer width 32 mm, jaw width 25 mm, height 25 mm
– Finish UD-matt
– Weight approx. 275 g
– Maximum air pressure 6.5 bar

Spokes and nipples
– Spokes Sapim CX-Ray, black
– Nipples Sapim Polyax Alu, black
– 28 spokes, double-crossed

Total weight rear wheel approx. 615 g

Scope of delivery

• Wheelset BMX HP64B-HSX Race
• including front and rear thru axles
• Lockring and 1 mm sprocket spacer for adjusting the chain line
• – Mounted rim tape (Schwalbe Tubeless)
• without sprocket and without brake disk

Note on colors:
We offer a selection of standard anodized colors. Please note: the colors displayed may differ from the actual colors. Since our parts are dyed with organic dyes, slight color differences may occur due to the aluminum's alloy components.